switch-it!

What is switch-it! ?

switch-it! is a simple configurator, monitoring, and controller app for your D.I.Y ESP8266 IoT device. You can use switch-it! for real-time monitoring and controling for example relay and motion sensor through WebSocket and MQTT. All configuration can be done via the app, including Wi-Fi and MQTT setup, so there is no need to hardcode anything, at all.

Features

- One Time Binding , the app will store connected device locally, so you don't have to manually enter address of the ESP everytime you wan't to access it.

- 3 Device Registration, bind up to 3 ESP8266 device for free.

- MQTT, support control and monitoring through MQTT. (Currently we only support, and tested MQTT implementation with HiveMQ broker).

- OTA Firmware Update, update device firmware through webserver.

- Auto Discovery, with mDNS service, the app will automatically look for configured ESP within the same local network.

- No Coding Required, we have provided a ready to flash firmware binary file. All you need to do is to configure WiFi connection, and bind it with the app.

- State Persistance, the board will revert back to the state it is in before a restart, or power out.

- Pull to Refresh, for easy reconnection to all bonded ESP board.

- Board Reset, swipe card to unbind the ESP board, and reset it to Wi-Fi configuration mode.

Device List

- General I/O

- Motion Sensor

Setup Guide

Setup, wiring guide, and firmware can be found in our GitHub Repository, invoklab/switch-it GitHub Repository .

Got feedback? We'd love to hear it!

You can send us your feedback or any inquiries to

feedback@invoklab.com