ConduitWorker: Conduit Bending

No other bend calculator handles mixed-size parallel offsets. Run 1/2" and 3/4" EMT through the same offset — ConduitWorker computes the exact mark shift for both pipes.

Every electrician running a mixed rack knows the problem: two different conduit sizes, same offset, no app that solves it. You lay them on the floor, measure the gap by hand, and re-bend what doesn't fit. That ends here.

ConduitWorker takes your two conduit sizes, your clearance, and your bend angle, then outputs the exact first-bend mark shift for the larger pipe. Both conduits stay parallel through the offset. No guessing. No re-bends. Multi-size parallel offset is built into v1 — not a future update.

Mark clarity is the other fix. QuickBend's most common complaint is confusion over which mark to place first. ConduitWorker labels every result: MARK 1 — ARROW, MARK 2 — STAR, MARK 3 — DIAMOND. A conduit-stick diagram on every result screen shows each mark's position, color-coded and dimensioned.

- NEW: Conduit fill check — NEC Chapter 9 fill for THHN in EMT, IMC, rigid

- NEW: Digital level — lay your phone on the pipe, read the bend angle live

- Multi-size parallel offset: two conduit sizes, one run, exact marks computed

- Standard offset with shrinkage: 10°, 22.5°, 30°, 45°, 60°

- 3-point saddle and 4-point saddle

- 90° stub-up with bender-specific deduct values

- Kicked 90°

- Same-size parallel offset

- Bender library: Greenlee 555, Greenlee hand, Klein, Ideal, Gardner Bender — preloaded

- Add your own custom bender with exact deduct values

- EMT, IMC, and rigid conduit OD reference tables

- Fractional input — enter 6 3/8, not 6.375

Works offline. No account required. No ads. No tracking beyond crash and usage analytics.

Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/