Smart 2022 (For non-cloud systems)
“ATTENTION: MULTITEK CLOUD application should be used for IP systems purchased in 2023 and later.”
★Alarm
• Zone 1, Zone 2, Zone 3 and Zone 4 can be activated/deactivated from the phone.
• Zones set on the tablet can be viewed on the phone.
• By using the widget feature of the application, you can practically activate/deactivate the zones selected for remote control.
★Searches
• While he is not at home, when someone comes home, he puts the photo taken on his phone.
• You can access missed calls from neighbors or security on your phone.
★Settings
• Connection: After setting the Primary IP, Secondary IP and port values in the application, you can connect from your phone with the username and password you specified from the tablet.
- Primary IP: The IP of the tablet must be entered. The port must be the same as the value you have determined and written in the settings - phone connection → port section on the tablet. (Valid for connection via Wifi.)
- Secondary IP: Directed IP must be written. The port must be the same as the value you wrote in the settings → phone connection → port section on the tablet. (Valid for the connection via Wi-Fi or mobile network.)
• Alarm:
- Alarm Information: Shows which zones are activated/deactivated on the tablet.
- Remote Alarm Control: Shows the zones set via Alarm → Alarm Settings → Wireless on the tablet. These values can also be adjusted on the phone.
- Alarm Tone: Allows selection of alarm warning tone.
• Smart House:
- Get Database: Information about rooms and devices belonging to rooms is retrieved.
- Select Room Icon: Icons can be selected for rooms.
• About: Shows the version number of the application.
★Smart Home
• It shows the rooms and the devices belonging to the rooms and the devices can be controlled.