Engineering Unit Conversion

UnitConv app helps in quick unit conversion from SI units to USCS/Imperial and vice versa for most of the units associated in engineering conventions and computations. Therefore, App can be very handy for engineers and students dealing with subjects such as thermodynamics, fluid mechanics, heat transfers and other applied engineering subjects where property data requires frequent conversion.

This app covers units under following18 major categories.

1. Mass (kg, lbm, slug, ounce, grain, M. Tonne, Ton)

2. Length (meter, ft, cm, in, mm, km, mile)

3. Area (m^2, ft^2, cm^2, in^2)

4. Volume (liter, gal (US), gal (UK), m^3. ft^3, fl_oz)

5. Temperature (deg C, deg F, Kelvin, Rankin)

6. Flow rate (lpm, gpm, cc/sec, ci/sec)

7. Force (Newton, dyne, kgf, lbf)

8. Pressure (kPa, Bar, psi, atm, kgf/cm^2, in_wg, mm_Hg )

9. Velocity (m/sec. ft/sc, kmph, mph)

10.Energy (Joule, cal, BTU, m.kgf, ft.lbf)

11.Power (kW, hp, kcal/s, BTU/hr, kgf.m/s, lbf.ft/s)

12.Density (kg/m^3, lb/ft^3, m/cc, lbf.sec^2/in^4)

13.Dynamic Viscosity (Pa.sec, poise, cP, reyn, kgf.sec/m^2, lbf.sec/ft^2)

14.Kinematic viscosity (stokes, cSt, newts)

15.Specific heat (joule/kg.K, BTU/lb.F, cal/kg.C)

16.Thermal Conductivity (W/m.K, BTU/hr.ft.F)

17.Enthalpy (kJ/kg, BTU/lb)

18.Entropy (kJ/kg.K, BTU/hr.R)

By default app provides conversion factor. However, users can enter data to convert its value in another unit. There is a separate section on Standard Gas Flow rate unit conversion. The following screen shots illustrate this for gas flow rates, pressure and dynamic viscosity.

With Best Compliments From

Kaup Shenoy Associates.