Adorable DIY Classic Frame Photo

Você está procurando quadro adorável DIY clássico da foto? Temos mais de 300 GRÁTIS

Figura photo is the easiest and funniest way to make your memories more amazing, unique and unforgettable. in this application will shares you step by stepp to make your memories photo more unique and different from the other.

Step 1. Measure the frame

The length of the vertical boards were 18 inches and the width of each board was roughly 3 1/2 inches.  And the two boards running horizontal were 17 1/2 inches.

To keep with the authentic look, we decided to use fence pickets to recreate this frame.

Step 2. Using the miter saw, we cut the ends of the fence pickets off and then measured and cut five – 18 inch lengths….AND two – 17 1/2 inch lengths from 1/2 inch whitewood.

Step 3. Then it was time to be patient!  Fence boards are usually water logged and will shrink as they dry.  If you’re making one of these cute frames, you’ll want to hold off putting the frame together until the boards have reached their dry state.

With the pickets lined up next to each other, we marked off the length of whitewood needed.  Approximately 17.5 inches.

Step 4. Using a small drill bit to avoid cracking the wood,  attach the white wood horizontal board to the pickets using 3/4 inch wood screws as pictured below.

Step 5. We found some very cheap labor (paid with candy) to paint the frames with furniture rollers, and then touched up with a brush.

Want to know more ?

Download this application now and get what you want here. worth to try and you will like it.

simply share through any social media platforms. thank you for downloading. please enjoy and give us any feedback.