Simple DIY Recycled Globe Lamp

An Application That Teaches You Simple DIY Recycled Globe Lamp Instructions

We're going to show you an Earth Day craft project in a very literal sense, and also show you how you can turn anything (not just a globe – anything can upcycle to become a lamp base, so get creative!) into a lamp with a simple lamp adapter kit.

Supplies needed to make your own lamp upcycle:supply2

Lamp Adapter Kit (if you are using a bottle as a base, there is also a bottle-specific adapter kit that will make it easy)

Lampshade

Drill and Screwdriver

Your base of choice – I’ll be showing you how I adapted this globe. I also used some heavy-gauge aluminum wire to make the process easier.

E-6000 Heavy-Duty Adhesive

- First – you’ll need to drill a hole (or two) to run your cord. Because the globe has holes at the axis points, I needed to drill at the top for the adapter, and near the bottom toward the back for the cord to run to the outlet. To help me run the cord, I fed a 20-inch length of aluminum wire through the holes. (It’s much easier to feed a stiff wire through than the electrical cord on its own – I’ll show you exactly how it came in handy when you read on.) Bend the wire on each end to make sure it stays put.

- Next, assemble the adapter. You may not need the harp (the wire that goes up over the top to hold certain kinds of lampshades) – the lampshade you choose will determine if it’s necessary. Since I wasn’t sure yet at this stage if the shade I had in storage would be suitable, I attached the harp base just in case. There are directions on the back of the kit to help you with this part as well – but seeing the photo below may be more helpful than the drawing on the back of the kit.

- Then, I carefully fed the adapter over one end of my wire, and screwed in into the top of the globe. I know it looks like the bottom in this photo, but I was working on it upside-down.

- Now here is where the wire came in so handy. I wrapped it tightly around the connection-end of the electrical wire, and then gently pulled up from the adapter until the wire ran all the way through the center of the globe.

Want to know more ?

Download this application now and get what you want here. worth to try and you will like it.

simply share through any social media platforms. thank you for downloading. please enjoy and give us any feedback.