TM puriSCOPE NG

TM puriSCOPE NG the app that lets you look inside beverage dispensing systems

Have you ever had a headache or digestive problems after drinking just one pint of draught beer? Well - most of the time it’s not the beer out of the KEG that’s causing that, but bad hygiene of the dispensing systems which is destroying the original fresh taste of the fine brews. Beer lines are cleaned regularly, but how can you make sure that they are really clean, since you can’t take a look inside the closed dispensing systems?

TM puriSCOPE NG can actually take a look into otherwise unaccessable systems. It is a system consisting of a photometer and a reporting app to measure the hygienic status inside beverage dispensing systems. The system works in combination with a colour changing cleaning solution (TM DESANA MAX FP), which is used for cleaning the inner surfaces of dispensing systems.

The solution changes colour from purple to green if the lines were dirty. However it stays purple if the lines are in perfect hygienic condition. So it tells you IF your lines are contaminated - and TM puriSCOPE NG tells you HOW contaminated they are by putting a number behind the colour change.

Just place the photometer into the TM DESANA MAX FP solution that was soaking inside the dispensing system for 5 minutes and read the verification result within seconds on the integrated display. Use the corresponding app (available for iOS and Android) to archive your data and generate digital reports.

USE IT AT EACH CLEANING:

- to document and prove the degree of hygiene directly after the lines have been cleaned

- to align the cleaning procedure with your specific circumstances (optimization)

USE IT BETWEEN TWO CLEANINGS:

- to check and document the quality of clean after a service call (quality control, brand-protection)

- to prove that contamination is coming from the lines, not from the beer

Interested? Don’t waste another great beer and contact us now: www. thonhauser.net or cleaning@thonhauser.net