Fold-Down DIY Hanging Bar

Isi 300 + Koleksi Of Fold-Down DIY Gantung Bar Dengan Kualitas Terbaik Untuk Gratis

This Fold-Down Hanging Bar Is Perfect For Halloween Outdoor Parties.

Ever wondered how you could turn your backyard into one awesome party venue? Well, this DIY hanging bar (a.k.a the fold-down Murphy Bar) is going to spice things up for your next party.

Sometimes we just want to have a place where we can store our drinks and food outdoors, especially for parties. WE found that whenever we had parties, the tables were always filled and we didn’t have enough space for bowls, bottles, and glasses. First off, this is no ordinary Murphy Bar. Apart from holding your drinks and glasses, it can also act as a mini-table to hold food and glasses. Check out the steps below to create your version of this cool DIY project.

Steps:

1. Cut the Cedar

Cut the cedars to the desired length using a miter saw. Do not include the door slats. Create four L-shaped blocks with right angles to help you clamp the box together.

2. Layout and Glue

Lay out the pieces. See the sides and vertical divider captured by the top and bottom. Glue them and secure with clamps.

Step 3. Drill and Screw

Drill holes with the countersink bit and screw the pieces together. Create the overhang by the top. It should be wider than the sides. Glue and clamp the top piece in place, and secure with screws.

4. Attach the Shelf Pleats

Measure for the correct location of the shelf pleats, then mark the area. Glue the cleats, and tack them in place.

5. Install the Shelf

Once the shelf pleat areas are marked, slide in the shelves and secure them with screws or wood glues. For this one, we added a dash of wood glue on the ends of the panels and slid them in. While waiting for the glue to dry, we proceeded to build the roof.

6. Build the Roof

want to know more?

for further information and detail tutorial, download this now and grab what you want.

please enjoy this Fold-Down DIY Hanging Bar and give us any feedback.