Use EVBox Install to easily install and configure EVBox charging stations
Note: EVBox Install is for qualified charging station installers only.
Configuring the charging station via EVBox Install app is a mandatory step in making the following stations operational:
• EVBox Livo
• EVBox Livo 2
• EVBox Liviqo
• Mercedes-Benz Wallbox
Other stations such as EVBox Elvi, EVBox BusinessLine or EVBox Iqon are configured via the EVBox Connect app instead.
-----------------------
With the EVBox Install app, installers can connect to the charging stations listed above and do the following:
• Configure the charging station to a local Ethernet, Wi-Fi, or cellular network to enable communication between a charging management service provider and the charging station.
• Set the maximum charge current.
• Configure the current balancing features.
• Provide station firmware updates.
All the steps to successfully complete a configuration are explained inside the app.
Do you need help with installing the station? Consult the charging station's installation manual.