Different levels of RAID
RAID 0 – Striped Disk Array without Fault Tolerance: Provides data striping (spreading out blocks of each file across multiple disk drives) but no redundancy. This improves performance but does not deliver fault tolerance. If one drive fails then all data in the array is lost.
RAID 1 – Mirroring Volume: Provides disk mirroring. Level 1 provides twice the read transaction rate of single disks and the same write transaction rate as single disks.
RAID 5 – Block Interleaved Distributed Parity: Provides data striping at the byte level and also stripe error correction information. This results in excellent performance and good fault tolerance. Level 5 is one of the most popular implementations of RAID.
RAID 10 (or RAID 0+1) – A Mirror of Stripes: Not one of the original RAID levels, two RAID 0 stripes are created, and a RAID 1 mirror is created over them. Used for both replicating and sharing data among disks.
Last updated on 2016年12月27日
此版本包含小幅错误修复和常规改进。请更新至最新版本，以获得更佳体验。
![[ROOT] Rashr - Flash Tool APK](https://image.winudf.com/v2/image/ZGUubWtydGNoeWFuLnJlY292ZXJ5dG9vbHNfaWNvbl8xNTI2MDE3MDI1XzAxNg/icon.png?w=102&fakeurl=1){kind=icon}
