Cardiac diagnosis-heart rate

Cardiac Diagnosis measures heart rate, arrhythmia, tachycardia, and bradycardia.

Cardiac diagnosis uses a built-in camera to detect blood circulation in the measurement area.

1. Measurement of heart rate and heart rate variability

You can measure the exact number using the built-in camera sensor of your smartphone or tablet.

2. Measurement Category

General Measurement- It measures 20 heartbeats to calculate the number of heartbeats per minute, and arrhythmia is differentiated by calculating the heart rate variability.

Precise measurement - The heart rate is measured for 1 minute to differentiate between heart rate and arrhythmia.

Continuous measurement - Check the heart condition by looking at the graph while continuously measuring.

All measurements are indicated in green for normal, yellow for caution, and red for abnormal.

If red is frequently detected, it is recommended that an electrocardiogram (EKG, ECG) test be performed at a hospital.

3. Results tracking

When the measurement result is saved, the measurement value and screen are saved and history management is possible.

"How to use and precautions"

1. In the heart-shaped view on the measurement screen, find the rear camera where the measurement site is visible, place your fingertips lightly, and click the Start button.

2. Measure while your hands are warm. -> If your hands are cold, blood circulation is not reliable and the measurement value is inaccurate.

3. Do not place your finger on the camera flash.

[Guide to the access rights required to use the heart diagnosis app]

1. Camera (required)

- Required to detect blood circulation in the measurement site.

2.Storage space (required)

- Required to save the measurement result.