The app is designed for communication via WLAN or mobile data connection with the integrated Profinet interface of the Simatic S7 CPU’s and communication processors for Android smartphones.
About In-app purchases the USER has the option to acquire capacity for up to 50 separate machines. The APP allows using different versions ( "Basic", "Standard" and "Advanced") per machine acquired an adapted to the needs of the USER activation of functional peripheries.
Standalone HMI for operator control and monitoring of machines, plants, buildings ...
Additional HMI for machines, equipment, buildings ...
Reporting and diagnostic system
Remote maintenance, remote control and service
Machine Data Collection
Functionality of the application in the Advanced version:
App Languages: English and German
Number of machines: 50
Pages / Functions: 53/159
Setpoints / Actual values: 99
Scope values: 1000
Display archive number: 50000
Number variables Watching: 50
PLC diagnostics messages
Speech end positions
Webcam as background
Air Control (Only Samsung Galaxy S5 and Note3) *1
Export data / Send mail
Import symbols (Variable table)
Backup / Restore
Read / write RFID (13.56 MHz) & NFC
Overview conditioning / groups
Mail / Export Diagnosis / Scope *2
Communications processor *2
Synchronize S7 & app with certain SPS standards
Functionality of the PLC program in the Advanced version:
S7 basic project, FC mode, FC Function
Compatibility Simatic HMI or other HMI suppliers possible.
Note on * 1: The "Air Control" option is only available for the Samsung Galaxy S5 and the Galaxy Note3
Note to * 2: When the CP communication the diagnostic buffer of the web server of the CPU is displayed.
The Export and Mail feature is not available in this type of communication.
The corresponding language file for the diagnostic buffer can be loaded in the update center of the CP’s.
Simatic S7 have programming knowledge and use of the supplied S7 basic design requirement for setting up.
Are not supported "rooted" phones.
Firmware Supported / Unsupported CPU’s and CP’s:
The CPU’s in the 300 series must have the firmware> = Version 3.2.
The CPU’s of the 400 series must have the firmware> = 6.0.
The CPU’s of the 1500s series must have the firmware> = 1.6.
For older firmware versions, individual applications can be created in addition.
The CP’s 300 series must have> = Version 3.0 firmware.
The CP’s of the 400 series have support AG_CTRL function.
(Unsupported CP’s as 6GK7 443-1EX10 / 6GK7 443-1EX11)
For unsupported CP’s individual applications can be created in addition.
The application and the corresponding Simatic S7 Package, offered on a Simatic S7 controller and an Android smartphone. one is "in-app purchase" necessary for each additional machine.
The activation takes place via the serial number of the Simatic S7 CPU and the Mac address of the smartphone.
This type of release provides additional protection against unauthorized access to the controls.
Step 7 is a trademark of Siemens AG.
Simatic is a trademark of Siemens AG.
TIA Portal is a trademark of Siemens AG.
S7 and Sinumerik is a trademark of Siemens AG.
S7-300, S7-400 and S7-1500 are registered trademarks of Siemens AG.