Easy DIY Chevron Wall Clock

Best Application That Provide Easy DIY Chevron Wall Clock With Detailed Images

we always making their own less expensive versions of cool items from stores, so we figured we could too.

It’s super adorable right?

You will need:

A square wood board (I used this basswood canvas)

A clock kit (I used this one)

A drill to make a small hole

Masking or painter’s tape

A measuring tape

A pencil

White and grey paint

Paintbrush

Exacto knife

Step one: Drill the hole

The first thing you will need to do is drill the small hole into the board. I was able to do this myself and it was easy enough. Make sure you make the hole large enough for your clock kit but don’t make the hole too large- but don’t worry about whether it looks neat or not, the clock will cover it.

Step two: Paint the board

Then, paint the board white and let it dry overnight. You don’t want to risk the tape peeling off the paint by being too eager, so best to let it dry for longer.

Step Three: Make your Chevron Pattern

Next, you will want to make the chevrons out of masking tape. I found this amazing method to tape off a chevron pattern, which is what I ended up doing. Basically, you make a grid, tape off a gingham pattern, and cut the chevrons out of it. It sounds more complicated than it is. But in case that is too much work for you, I found this great chevron stencil for $7. It makes the final cost of the project a little higher, but for those of you who are a little more DIY-challenged it makes it easier.

But if you want to try the masking tape method, it is quite easy.

First I marked off 1 inch intervals on each side of the canvas:

Want to know more ?

Download this application now and get what you want here. worth to try and you will like it.

simply share through any social media platforms. thank you for downloading. please enjoy and give us any feedback.