Arc Flash Calculator v1.0 is a free and easy to use tool based on the "IEEE 1584 Guide for Performing Arc-Flash Hazard Calculations" for calculating arc incident energy, arc flash approach boundary limit and hazard/risk category required by NEC and OSHA when work is to be performed on or near the energized equipment. The tool is not free of possible miscalculations, errors or invalid data, so it should be not taken as a 100% safe source. Always give advance to the more sophisticated tools, manufacturer datasheets and relevant standard sources. All comments and thoughts are welcomed and feel free to contact us on e-mail: firstname.lastname@example.org or email@example.com.
More about us: OpenElectrical.org is a free, independent electrical (power systems) engineering design resource for industry practitioners. It is aimed at bridging the gap between what is taught at engineering school and what is needed to practice effectively in industry. Industry practitioners are normally busy people and when they need information, it\'s usually for something related to what they are doing right then and there. However, their requirements will depend on how deep or broad they need the information to be. So in case of any doubts or inconsistencies OpenElectrical.org is certainly worth of visiting and making sure that what are You trying to do is based on the proper information.