Draft the floor plan to the desired scale. This will also determine the size of the model. Most models are designed at 1/8-inch scale or 1/16-inch scale. Models for the average size home are done at 1/8-inch scale. Make sure wall thickness is designed to scale. Complete the design on tracing vellum with a drafting pencil.
Take completed floor plan to a graphics store that creates blueprints from tracing vellum. Get at least two blueprints done.
Cut the floor plan from the blueprint plan. Use an Exacto knife to cut the outer walls of the floor plan.
Spray the backside of the blueprint with spray adhesive. This can be obtained at the local graphics store.
Apply the cut floor plan to foam core. This material is available in most art stores. Make sure the floor plan is smoothed out over the foam core.
Cut the foam core along the outline of the floor plan. Score the foam core several times in order to cut it. Do not attempt to make a complete cut at one time.
Create wall elevations with ceiling heights at the same scale as the floor plan. The length of the walls should equal the various walls in the floor plan. Each wall should be cut out and glued to the corresponding wall thickness in the floor plan. Plans with multiple floors may use the same process and stacked on top of each other when completed.
If you are renovating your home, and you are looking to put new flooring in, then this article has been written to give you some tips that may come in handy. Here are a few things to think about when renovating your floor.
Tip 1. One of the first tips that you may need to take into consideration is measuring the area that the new floor will be placed in. Measuring the floor will give you an accurate reading as to how big it should be. So start with taking measurements of the area.
Tip 2. The next tip that can be suggested is choosing the right type of flooring that matches with the room you are renovating. This is important, as you do not want to place carpet in the bathroom area, or in the kitchen. So choose accordingly to what floor will suit the area being renovated.
Tip 3. Working out your budget is also important. When it comes to renovating, set yourself a budget to stick to. This way you do not spend more than you have to on your materials that are needed to finish the job.
Tip 4. When choosing the floor design, be sure to make it match the rest of the room. Colour scheme is something that you may need to take into consideration. By choosing the right texture and colour it can really set the room off with a homely feel about it.
Tip 5. If you have small children and you are putting new carpet it, it may be wise to choose a colour where stains are not as visible as what they would be on a white carpet. The lighter the carpet colour is, the more the stains will show up.
So if you are renovating your home with new flooring, why not take some of these tips into consideration. You may be surprised at the end result.